Non-Stop-Routing; Non-Stop-Routing Interval - HP FlexNetwork 3600 v2 Series Command Reference Manual

Related commands: isis, isis enable.
Examples
# Specify the NET as 10.0001.1010.1020.1030.00, of which 10.0001 is the area ID and
1010.1020.1030 is the system ID.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] network-entity 10.0001.1010.1020.1030.00

non-stop-routing

Syntax
non-stop-routing
undo non-stop-routing
View
IS-IS view
Default level
2: System level
Parameters
None
Description
Use non-stop-routing to enable IS-IS NSR.
Use undo non-stop-routing to disable IS-IS NSR.
By default, IS-IS NSR is disabled.
IMPORTANT:
The IS-IS GR and IS-IS NSR features are mutually exclusive. Do not configure the
non-stop-routing and graceful-restart commands at the same time.
Examples
# Enable NSR for IS-IS process 1.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] non-stop-routing

non-stop-routing interval

Syntax
non-stop-routing interval interval-value
undo non-stop-routing interval
View
IS-IS view
Default level
2: System view
177