HP FlexNetwork 3600 v2 Series Command Reference Manual page 44

Networks :
192.168.1.0
Configured peers : None
Triggered updates sent : 0
Number of routes changes : 0
Number of replies to queries : 0
Table 7 Command output
Field
Public VPN-instance name (or Private VPN-instance
name)
RIP process
RIP version
Preference
Checkzero
Default-cost
Summary
Hostroutes
Maximum number of balanced paths
Update time
Timeout time
Suppress time
update output delay
output count
Garbage-collect time
TRIP retransmit time
TRIP response packets retransmit count
Silent interfaces
Default routes
Default route cost
Verify-source
Networks
Configured peers
Description
The RIP process runs under a public VPN
instance./The RIP process runs under a private VPN
instance.
RIP process ID.
RIP version 1 or 2.
RIP route priority.
Indicates whether the zero field check is enabled for
RIPv1 messages.
Default cost of the redistributed routes.
Indicates whether route summarization is enabled.
Indicates whether to receive host routes.
Maximum number of load balanced routes.
RIP update interval.
RIP timeout time.
RIP suppress interval.
RIP packet sending interval.
Maximum number of RIP packets sent at each
interval.
RIP garbage collection interval.
TRIP retransmit interval for sending update requests
and responses.
Maximum retransmit times for update requests and
responses.
Number of silent interfaces, which do not periodically
send updates.
Indicates whether a default route is sent to RIP
neighbors:
•
only—Means only a default route is advertised.
•
originate—Means a default route is advertised
along with other routes.
•
disable—Means no default route is advertised.
Cost of the default route.
Indicates whether the source IP address is checked
on the received RIP routing updates.
Networks enabled with RIP.
Configured neighbors.
32