If-Match Acl; Ip Local Policy-Based-Route - HP FlexNetwork 3600 v2 Series Command Reference Manual

If no policy name is specified, all PBR policy information is displayed. If a policy name is specified,
information about the specified policy is displayed.
Examples
# Display the PBR policy information.
<Sysname> display policy-based-route
Policy based routing configuration information:
policy-based-route : aaa
Node 1
apply ip-address next-hop 1.1.1.1
Table 100 Command output
Field
policy-based-route : aaa
Node 1 permit :
apply ip-address next-hop 1.1.1.1

if-match acl

Syntax
if-match acl acl-number
undo if-match acl
View
PBR policy node view
Default level
2: System level
Parameters
acl-number: ACL number, in the range of 2000 to 3999. The number of a basic ACL ranges from
2000 to 2999 and that of an advanced ACL ranges from 3000 to 3999.
Description
Use if-match acl to define an ACL match criterion.
Use undo if-match acl to remove the ACL match criterion.
Examples
# Permit the packets matching ACL 2010.
<Sysname> system-view
[Sysname] policy-based-route aa permit node 11
[Sysname-pbr-aa-11] if-match acl 2010

ip local policy-based-route

Syntax
ip local policy-based-route policy-name
undo ip local policy-based-route policy-name
permit :
Description
The policy name is aaa.
The matching mode of node 1 is permit.
The next hop address is 1.1.1.1.
443