HP FlexNetwork 3600 v2 Series Command Reference Manual page 87

|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display ospf interface to display OSPF interface information.
If no OSPF process is specified, the OSPF interface information of all OSPF processes is displayed.
Examples
# Display OSPF interface information.
<Sysname> display ospf interface
Area: 0.0.0.0
IP Address
192.168.1.1
Area: 0.0.0.1
IP Address
172.16.0.1
Table 17 Command output
Field
Area
IP address
Type
State
Cost
OSPF Process 1 with Router ID 192.168.1.1
Interfaces
Type
PTP
Type
Broadcast
Description
Area ID of the interface.
Interface IP address (regardless of whether TE is enabled or not).
Interface network type:
•
PTP
•
PTMP
•
Broadcast
•
NBMA
Interface state defined by interface state machine:
•
Down—In this state, no protocol traffic will be sent or received on the
interface.
•
Waiting—Means the interface starts sending and receiving Hello packets
and the router is trying to determine the identity of the (Backup) designated
router for the network.
•
p-2-p—Means the interface will send Hello packets at the interval of
HelloInterval, and try to establish an adjacency with the neighbor.
•
DR—Means the router itself is the designated router on the attached
network.
•
BDR—Means the router itself is the backup designated router on the
attached network.
•
DROther—Means the router is a DROther router on the attached network.
Interface cost.
State Cost Pri
P-2-P 1562 1
State Cost Pri
DR 1 1
75
DR BDR
0.0.0.0 0.0.0.0
DR BDR
172.16.0.1 0.0.0.0