Reset Ripng Process; Reset Ripng Statistics - HP FlexNetwork 3600 v2 Series Command Reference Manual

•
The preference set by the routing policy applies to all matching RIPng routes. The preference of
other routes is set by the preference command.
•
If no preference is set by the routing policy, the preference of all RIPng routes is set by the
preference command.
Examples
# Set the RIPng route preference to 120.
<Sysname> system-view
[Sysname] ripng 100
[Sysname-ripng-100] preference 120
# Restore the default RIPng route preference.
[Sysname-ripng-100] undo preference

reset ripng process

Syntax
reset ripng process-id process
View
User view
Default level
2: System level
Parameters
process-id: RIPng process ID, in the range of 1 to 65535.
Description
Use reset ripng process to reset the specified RIPng process.
After executing the command, you are prompted whether you want to reset the RIPng process.
Examples
# Reset RIPng process 100.
<Sysname> reset ripng 100 process
Warning : Reset RIPng process? [Y/N]:Y

reset ripng statistics

Syntax
reset ripng process-id statistics
View
User view
Default level
1: Monitor level
Parameters
process-id: RIPng process ID, in the range of 1 to 65535.
Description
Use reset ripng statistics to clear the statistics of the specified RIPng process.
276