Peer Group (Ipv6 Address Family View); Peer Ignore (Ipv6 Address Family View) - HP FlexNetwork 3600 v2 Series Command Reference Manual

[Sysname-acl6-basic-2000] rule permit source 2001:1:: 64
[Sysname-acl6-basic-2000] quit
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] peer 1:2::3:4 filter-policy 2000 export

peer group (IPv6 address family view)

Syntax
peer { ipv4-address | ipv6-address } group group-name [ as-number as-number ]
undo peer ipv6-address group group-name
View
IPv6 address family view
Default level
2: System level
Parameters
group-name: Name of an IPv4 or IPv6 peer group, a string of 1 to 47 characters.
ipv4-address: IPv4 address of a peer.
ipv6-address: IPv6 address of a peer.
as-number: Specifies the AS number of the peer/peer group, in the range of 1 to 4294967295.
Description
Use peer group to add a peer to a configured peer group.
Use undo peer group to delete a specified peer from a peer group.
By default, the peer does not belong to any peer group.
Examples
# Create a peer group named test and add the peer 1:2::3:4 to the peer group.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] group test external
[Sysname-bgp-af-ipv6] peer 1:2::3:4 as-number 200
[Sysname-bgp-af-ipv6] peer 1:2::3:4 group test

peer ignore (IPv6 address family view)

Syntax
peer { ipv6-group-name | ipv6-address } ignore
undo peer { ipv6-group-name | ipv6-address } ignore
View
IPv6 address family view
Default level
2: System level
389