Table 30 Command output
Field
Restart Interval
SA Bit Supported
Total Number of Interfaces = 1
Restart Status
Number of LSPs Awaited
T3 Timer Status
T2 Timer Status
display isis interface
Syntax
display isis interface [ statistics | [ interface-type interface-number ] [ verbose ] ] [ process-id |
vpn-instance vpn-instance-name ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
statistics: Displays IS-IS interface statistics.
interface-type interface-number: Specifies an interface by its type and number.
verbose: Displays detailed IS-IS interface information.
process-id: Displays the IS-IS interface information of the IS-IS process. The ID is in the range of 1 to
65535.
vpn-instance vpn-instance-name: Displays the IS-IS interface information of the MPLS L3VPN.
vpn-instance-name is a case-sensitive string of 1 to 31 characters. If no VPN is specified, the IS-IS
interface information of the public network is displayed.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display isis interface to display IS-IS interface information.
Examples
# Display brief IS-IS interface information.
<Sysname> display isis interface
Interface information for ISIS(1)
134
Description
Graceful Restart interval.
The SA bit is set.
The current IS-IS interface number.
Graceful Restart status.
Number of LSPs not obtained by the GR restarter
from GR helpers during LSDB synchronization.
Remaining time of T3 timer.
Remaining time of T2 Timer.