Default-Cost (Ospf Area View) - HP FlexNetwork 3600 v2 Series Command Reference Manual

Hide thumbs Also See for FlexNetwork 3600 v2 Series:
Table of Contents

Advertisement

limit: Specifies the default upper limit of routes redistributed per time, in the range of 1 to
2147483647.
tag: Specifies the default tag for redistributed routes, in the range of 0 to 4294967295.
type: Specifies the default type for redistributed routes: 1 or 2.
Description
Use default to configure default parameters for redistributed routes.
Use undo default to restore default values.
The cost, route type, tag, and the upper limit are 1, 2, 1 and 1000 by default.
Related commands: import-route.
Examples
# Configure the default cost, upper limit, tag and type as 10, 20000, 100 and 2 for redistributed
external routes.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] default cost 10 limit 20000 tag 100 type 2

default-cost (OSPF area view)

Syntax
default-cost cost
undo default-cost
View
OSPF area view
Default level
2: System level
Parameters
cost: Specifies a cost for the default route advertised to the Stub or NSSA area, in the range of 0 to
16777214.
Description
Use default-cost to configure a cost for the default route advertised to the stub or NSSA area.
Use undo default-cost to restore the default value.
The cost defaults to 1.
This command is only applicable to the ABR of a stub area or the ABR/ASBR of an NSSA area.
Related commands: stub and nssa.
Examples
# Configure Area 1 as a stub area, and specify the cost of the default route advertised to the stub
area as 20.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] area 1
[Sysname-ospf-100-area-0.0.0.1] stub
[Sysname-ospf-100-area-0.0.0.1] default-cost 20
63

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents