Filter-Policy Import (Rip View) - HP FlexNetwork 3600 v2 Series Command Reference Manual

Hide thumbs Also See for FlexNetwork 3600 v2 Series:
Table of Contents

Advertisement

By default, RIP does not filter outbound routes.
If a protocol is specified, RIP filters only the routes redistributed from the specified routing protocol.
Otherwise, RIP filters all routes to be advertised.
If interface-type interface-number is specified, RIP filters only the routes advertised by the specified
interface. Otherwise, RIP filters routes advertised by all RIP interfaces.
If you want to reference an advanced ACL (with a number from 3000 to 3999) in the command, the
ACL should be configured with the rule [ rule-id ] { deny | permit } ip source sour-addr sour-wildcard
command to deny/permit a route with the specified destination, or with the rule [ rule-id ] { deny |
permit } ip source sour-addr sour-wildcard destination dest-addr dest-wildcard command to
deny/permit a route with the specified destination and mask. The source keyword specifies the
destination address of a route and the destination keyword specifies the subnet mask of the route
(the subnet mask must be valid; otherwise, the configuration is ineffective).
Related commands: import-route and ip ip-prefix; acl (ACL and QoS Command Reference).
Examples
# Reference ACL 2000 to filter outbound routes.
<Sysname> system-view
[Sysname] acl number 2000
[Sysname-acl-basic-2000] rule deny source 192.168.10.0 0.0.0.255
[Sysname-acl-basic-2000] quit
[Sysname] rip 1
[Sysname-rip-1] filter-policy 2000 export
# Reference IP prefix list abc to filter outbound routes on Vlan-interface11.
[Sysname-rip-1] filter-policy ip-prefix abc export Vlan-interface 11
# Configure ACL 3000 to permit only route 113.0.0.0/16 to pass, and reference ACL 3000 to filter
outbound routes.
<Sysname> system-view
[Sysname] acl number 3000
[Sysname-acl-adv-3000] rule 10 permit ip source 113.0.0.0 0 destination 255.255.0.0 0
[Sysname-acl-adv-3000] rule 100 deny ip
[Sysname-acl-adv-3000] quit
[Sysname] rip 1
[Sysname-rip 1] filter-policy 3000 export

filter-policy import (RIP view)

Syntax
filter-policy { acl-number | gateway ip-prefix-name | ip-prefix ip-prefix-name [ gateway
ip-prefix-name ] } import [ interface-type interface-number ]
undo filter-policy import [ interface-type interface-number ]
View
RIP view
39

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents