Display Router Id; Dscp (Ospf View) - HP FlexNetwork 3600 v2 Series Command Reference Manual

display router id

Syntax
display router id [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display router id to display the global router ID.
Examples
# Display the global router ID.
<Sysname> display router id
Configured router ID is 1.1.1.1

dscp (OSPF view)

Syntax
dscp dscp-value
undo dscp
View
OSPF view
Default level
2: System level
Parameters
dscp-value: Sets the Differentiated Services Code Point (DSCP) value for OSPF packets, in the
range of 0 to 63.
Description
Use dscp to set the DSCP value for OSPF packets.
Use undo dscp to restore the default.
By default, the DSCP value in OSPF packets is 48.
Examples
# Set the DSCP value for OSPF packets of OSPF process 1 to 63.
88