Display Ospfv3 Interface - HP FlexNetwork 3600 v2 Series Command Reference Manual

Field
GR remaining time
Neighbor ID
Interface
Instance ID

display ospfv3 interface

Syntax
display ospfv3 interface [ interface-type interface-number | statistic ] [ | { begin | exclude |
include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
interface-type interface-number: Specifies an interface by its type and number.
statistic: Displays the interface statistics.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display ospfv3 interface to display OSPFv3 interface information.
Examples
# Display OSPFv3 interface information.
<Sysname> display ospfv3 interface vlan-interface 10
Vlan-interface 10 is up, line protocol is up
Interface ID 518
IPv6 Prefixes
FE80::1441:0:E213:1 (Link-Local Address)
2000:1::1
OSPFv3 Process (1), Area 0.0.0.1, Instance ID 0
Router ID 2.2.2.2, Network Type POINTOPOINT, Cost: 1562
Description
•
Calculating routes—Indicates route calculation is
in process.
•
Flushing LSAs—Indicates the device is flushing
stale LSA.
•
Normal—Indicates the device is not in GR or
Helper status.
•
Helper—Indicates the Helper status.
Remaining time before the GR timer expires.
Router ID of the neighbor router.
Outbound interface.
Instance ID.
291