Display Ip Extcommunity-List; Display Route-Policy - HP FlexNetwork 3600 v2 Series Command Reference Manual

Community List Number 1
permit

display ip extcommunity-list

Syntax
display ip extcommunity-list [ ext-comm-list-number ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
ext-comm-list-number: Extended community list number, in the range of 1 to 199.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display ip extcommunity-list to display BGP extended community list information.
All BGP extended community list information will be displayed if no ext-comm-list-number is
specified.
Related commands: ip extcommunity-list, if-match extcommunity, and apply extcommunity.
Examples
# Display the information of BGP extended community list 1.
<Sysname> display ip extcommunity-list 1
Extended Community List Number 1
permit rt : 9:6

display route-policy

Syntax
display route-policy [ route-policy-name ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
route-policy-name: Routing policy name, a case-sensitive string of 1 to 63 characters.
1:1 1:2 2:2
419