Filter-Policy Import (Ipv6 Address Family View/Ipv6 Bgp-Vpn Instance View) - HP FlexNetwork 3600 v2 Series Command Reference Manual

[Sysname-acl6-adv-3000] rule 10 permit ipv6 source 2001::1 128 destination
ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff 128
[Sysname-acl6-adv-3000] rule 100 deny ipv6
[Sysname-acl6-adv-3000] quit
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] filter-policy 3000 export
filter-policy import (IPv6 address family view/IPv6 BGP-VPN
instance view)
Syntax
filter-policy { acl6-number | ipv6-prefix ipv6-prefix-name } import
undo filter-policy import
View
IPv6 address family view, IPv6 BGP-VPN instance view
Default level
2: System level
Parameters
acl6-number: Number of an IPv6 ACL used to match against the destination address field of routing
information, ranging from 2000 to 3999.
ipv6-prefix-name: Name of an IPv6 prefix list used to match against the destination address field of
routing information, a string of 1 to 19 characters.
Description
Use filter-policy import to filter inbound routing information using a specified filter.
Use undo filter-policy import to cancel filtering inbound routing information.
By default, no inbound routing information is filtered.
If you want to reference an advanced ACL (with a number from 3000 to 3999) in the command, the
ACL should be configured with the rule [ rule-id ] { deny | permit } ipv6 source sour sour-prefix
command to deny/permit a route with the specified destination, or with the rule [ rule-id ] { deny |
permit } ipv6 source sour sour-prefix destination dest dest-prefix command to deny/permit a route
with the specified destination and prefix. The source keyword specifies the destination address of a
route and the destination keyword specifies the prefix of the route (the prefix must be valid;
otherwise, the configuration is ineffective).
Examples
# Reference ACL6 2001 to filter all inbound routes.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] filter-policy 2001 import
# Configure ACL6 3000 to permit only route 2001::1/128 to pass, and reference ACL6 3000 to filter
inbound routes.
<Sysname> system-view
[Sysname] acl ipv6 number 3000
371