Ipv6-Family - HP FlexNetwork 3600 v2 Series Command Reference Manual

Default level
2: System level
Parameters
protocol: Redistributes routes from the specified protocol, which can be direct, isisv6, ospfv3,
ripng and static.
process-id: Process ID, in the range of 1 to 65535. The default is 1. It is available only when the
protocol is isisv6, ospfv3 or ripng.
med-value: Applies the MED value to redistributed routes. The value is in the range of 0 to
4294967295. If not specified, the cost of the redistributed route is used as its MED in the IPv6 BGP
routing domain.
route-policy-name: Name of a routing policy used to filter redistributed routes, a string of 1 to 63
characters.
Description
Use import-route to redistribute routes from another routing protocol.
Use undo import-route to remove the configuration.
By default, IPv6 BGP does not redistribute routes from any routing protocol.
The routes redistributed using the import-route command has the INCOMPLETE origin attribute.
Examples
# Redistribute routes from RIPng 1.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] import-route ripng 1

ipv6-family

Syntax
ipv6-family [ vpn-instance vpn-instance-name ]
undo ipv6-family [ vpn-instance vpn-instance-name ]
View
BGP view
Default level
2: System level
Parameters
vpn-instance vpn-instance-name: Enters IPv6 BGP-VPN instance view. vpn-instance-name is a
string of 1 to 31 case-sensitive characters.
Description
Use ipv6-family to enter IPv6 address family view.
Use undo ipv6-family to remove all configurations from the view.
Use the ipv6-family vpn-instance vpn-instance-name command to enter IPv6 BGP-VPN instance
view.
Use the undo ipv6-family vpn-instance vpn-instance-name command to remove all configurations
from the view.
373