HP FlexNetwork 3600 v2 Series Command Reference Manual page 281

View
Any view
Default level
1: Monitor level
Parameters
process-id: RIPng process ID, in the range of 1 to 65535.
interface-type interface-number: Specifies an interface by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display ripng interface to display the interface information of the RIPng process.
If no interface is specified, information about all interfaces of the RIPng process will be displayed.
Examples
# Display the interface information of RIPng process 1.
<Sysname> display ripng 1 interface
Interface-name: Vlan-interface11
Table 55 Command output
Field
Interface-name
Link Local Address
Split-horizon
Poison-reverse
MetricIn/MetricOut
Default route
Link Local Address: FE80::20F:E2FF:FE30:C16C
Split-horizon: on
MetricIn: 0
Default route: off
Summary address:
3:: 64
3:: 16
IPsec policy name: policy001, SPI: 300
Poison-reverse: off
MetricOut: 1
Description
Name of an interface running RIPng.
Link-local address of an interface running RIPng.
Indicates whether the split horizon function is
enabled:
•
on—Enabled.
•
off—Disabled.
Indicates whether the poison reverse function is
enabled:
•
on—Enabled.
•
off—Disabled.
Additional metric to incoming and outgoing routes
•
Only/Originate—Only means that the interface
advertises only the default route. Originate
269