Enable Ipsec-Policy (Ripng View) - HP FlexNetwork 3600 v2 Series Command Reference Manual

Dest 3FFE:C00:C18:2::/64,
via FE80::200:5EFF:FE04:B602, cost
Peer FE80::200:5EFF:FE04:B601 on Vlan-interface12
Dest 3FFE:C00:C18:1::/64,
via FE80::200:5EFF:FE04:B601, cost
Dest 3FFE:C00:C18:3::/64,
via FE80::200:5EFF:FE04:B601, cost
Peer FE80::200:5EFF:FE04:3302
Dest 100::/32,
via FE80::200:5EFF:FE04:3302, cost
Dest 4000:1::/64,
via FE80::200:5EFF:FE04:3302, cost
Dest 4000:2::/64,
via FE80::200:5EFF:FE04:3302, cost
Dest 4000:3::/64,
via FE80::200:5EFF:FE04:3302, cost
Dest 4000:4::/64,
Table 56 Command output
Field
Peer
Dest
via
cost
tag
Sec
"A"
"S"
"G"

enable ipsec-policy (RIPng view)

Syntax
enable ipsec-policy policy-name
undo enable ipsec-policy
View
RIPng view
Default level
2: System level
Parameters
policy-name: IPsec policy name, a string of 1 to 15 characters.
2, tag 0, A, 34 Sec
2, tag 0, A, 13 Sec
2, tag 0, A, 13 Sec
on Vlan-interface13
2, tag 0, A, 6 Sec
2, tag 0, A, 6 Sec
2, tag 0, A, 6 Sec
2, tag 0, A, 6 Sec
Description
Neighbor connected to the interface.
IPv6 destination address.
Next hop IPv6 address.
Routing metric value.
Route tag.
Time that a route entry stays in a particular state.
The route is in aging state.
The route is in suppressed state.
The route is in Garbage-collect state.
271