Ispf Enable; Log-Peer-Change - HP FlexNetwork 3600 v2 Series Command Reference Manual

<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] import-route rip 40 type 2 tag 33 cost 50

ispf enable

Syntax
ispf enable
undo ispf enable
View
OSPF view
Default level
2: System level
Parameters
None
Description
Use ispf enable to enable OSPF ISPF.
Use undo ispf enable to disable OSPF ISPF.
By default, OSPF ISPF is disabled.
When a network topology is changed, ISPF allows the system to recompute only the affected part of
the shortest path tree (SPT), instead of the entire SPT.
Examples
# Enable OSPF ISPF.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] ispf enable

log-peer-change

Syntax
log-peer-change
undo log-peer-change
View
OSPF view
Default level
2: System level
Parameters
None
Description
Use log-peer-change to enable the logging of OSPF neighbor state changes.
Use undo log-peer-change to disable the logging.
99