Display Bgp Ipv6 Peer - HP FlexNetwork 3600 v2 Series Command Reference Manual

Field
Origin

display bgp ipv6 peer

Syntax
display bgp ipv6 peer [ group-name log-info | ipv4-address verbose | ipv6-address { log-info |
verbose } | verbose ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
group-name: Name of an IPv4 or IPv6 peer group, a string of 1 to 47 characters.
ipv4-address: IPv4 address of a peer.
ipv6-address: Specifies the IPv6 address of a peer to be displayed.
log-info: Displays log information of the specified peer.
verbose: Displays the detailed information of the peer.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display bgp ipv6 peer to display peer/peer group information.
If no parameter specified, information about all peers and peer groups is displayed.
Examples
# Display all IPv6 peer information.
<Sysname> display bgp ipv6 peer
BGP local router ID : 192.168.1.40
Local AS number : 100
Total number of peers : 1
Description
ORIGIN attribute of the route, which can take on one of the following values:
•
i—Indicates the route is interior to the AS. Summary routes and routes defined using
the network command are considered IGP routes.
•
e—Indicates that a route is learned from the exterior gateway protocol (EGP).
•
?—Short for INCOMPLETE. It indicates that the origin of a route is unknown and the
route is learned by other means. BGP sets ORIGIN attribute of routes learned from
other IGP protocols to INCOMPLETE.
Peers in established state : 0
354