Display Ip As-Path; Continue - HP FlexNetwork 3600 v2 Series Command Reference Manual

continue

Syntax
continue [ node-number ]
undo continue
View
Routing policy view
Default level
2: System level
Parameters
node-number: Routing policy node number, in the range of 0 to 65535.
Description
Use continue to specify the next node of the routing policy to be matched.
Use undo continue to remove the configuration.
By default, no next routing policy node is specified.
The node number specified must be larger than the current node number.
Example
# Create routing policy policy1 with node 10, and specify the match mode as permit. Specify the
number of the next routing policy node to be matched as 20.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy] continue 20

display ip as-path

Syntax
display ip as-path [ as-path-number ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
as-path-number: AS path list number, in the range of 1 to 256.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display ip as-path to display BGP AS path list information.
417