Peer Capability-Advertise Conventional - HP FlexNetwork 3600 v2 Series Command Reference Manual

Parameters
ip-address: IP address of a peer.
Description
Use peer bfd to enable BFD for a BGP peer.
Use undo peer bfd to disable BFD for a BGP peer.
By default, BFD is disabled.
After the link to the BGP peer fails, BFD may detect the failure before the system performs GR. As a
result, GR will fail. If GR capability is enabled for BGP, use BFD with caution. If GR and BFD are both
enabled, do not disable BFD during a GR process; otherwise, GR may fail.
Examples
# Enable BFD for BGP peer 1.1.1.1.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] peer 1.1.1.1 bfd

peer capability-advertise conventional

Syntax
peer { group-name | ip-address } capability-advertise conventional
undo peer { group-name | ip-address } capability-advertise conventional
View
BGP view
Default level
2: System level
Parameters
group-name: Name of a peer group, a string of 1 to 47 characters.
ip-address: IP address of a peer.
Description
Use peer capability-advertise conventional to disable BGP multi-protocol extension and route
refresh for a peer/peer group.
Use undo peer capability-advertise conventional to enable BGP multi-protocol extension and
route refresh for a peer/peer group.
By default, BGP multi-protocol extension and route refresh are enabled.
Examples
# In BGP view, disable multi-protocol extension and route refresh for peer 160.89.2.33.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] peer 160.89.2.33 as-number 100
[Sysname-bgp] peer 160.89.2.33 capability-advertise conventional
232