HP FlexNetwork 3600 v2 Series Command Reference Manual page 157

Field
# Display detailed IS-IS IPv4 routing information.
<Sysname> display isis route verbose
IPV4 Dest : 1.1.0.0/16
Admin Tag : -
NextHop :
1.2.1.1
IPV4 Dest : 1.2.0.0/16
Admin Tag : -
NextHop :
Direct
Flags: D-Direct, R-Added to RM, L-Advertised in LSPs, U-Up/Down Bit Set
IPV4 Dest : 1.1.0.0/16
Admin Tag : -
IPV4 Dest : 1.2.0.0/16
Admin Tag : -
NextHop :
Direct
Flags: D-Direct, R-Added to RM, L-Advertised in LSPs, U-Up/Down Bit Set
Table 38 Command output
Field
Route information for ISIS(1)
ISIS(1) IPv4 Level-1 Forwarding Table
ISIS(1) IPv4 Level-2 Forwarding Table
IPV4 Dest
Int. Cost
Route information for ISIS(1)
-----------------------------
ISIS(1) IPv4 Level-1 Forwarding Table
-------------------------------------
Int. Cost : 20
Src Count : 2
Interface :
Vlan11
Int. Cost : 10
Src Count : 2
Interface :
Vlan11
ISIS(1) IPv4 Level-2 Forwarding Table
-------------------------------------
Int. Cost : 20
Src Count : 2
Int. Cost : 10
Src Count : 3
Interface :
Vlan11
Description
Route information for IS-IS process 1.
IS-IS IPv4 routing information for Level-1.
IS-IS IPv4 routing information for Level-2.
IPv4 destination.
Internal route cost.
145
Description
•
L—The route has been advertised in an LSP.
•
U—A route's penetration flag. Setting it to UP
can prevent an LSP sent from L2 to L1 from
being sent back to L2.
Ext. Cost : NULL
Flag
ExitIndex :
Ext. Cost : NULL
Flag
ExitIndex :
Ext. Cost : NULL
Flag
Ext. Cost : NULL
Flag
ExitIndex :
: R/L/-
0x00000008
: D/L/-
0x00000000
: -/-/-
: D/L/-
0x00000000