Network (Bgp/Bgp-Vpn Instance View) - HP FlexNetwork 3600 v2 Series Command Reference Manual

View
BGP view
Default level
2: System level
Parameters
None
Description
Use log-peer-change to enable the global BGP logging on peers going up and down.
Use undo log-peer-change to disable the function.
By default, the function is enabled.
Examples
# Enable BGP logging on peers going up and down.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] log-peer-change

network (BGP/BGP-VPN instance view)

Syntax
network ip-address [ mask | mask-length ] route-policy route-policy-name
undo network ip-address [ mask | mask-length ]
View
BGP view, BGP-VPN instance view
Default level
2: System level
Parameters
ip-address: Destination IP address.
mask: Mask of the network address, in dotted decimal notation.
mask-length: Mask length, in the range of 0 to 32.
route-policy-name: Routing policy applied to the route. The name is a case-sensitive string of 1 to 63
characters.
Description
Use network to inject a network to the local BGP routing table.
Use undo network to remove a network from the BGP routing table.
By default, no network route is injected.
The network route to be injected must exist in the local IP routing table, and using a routing policy
makes route management more flexible.
The ORIGIN attribute of the network route injected with the network command is IGP.
Examples
# In BGP view, inject the network segment 10.0.0.0/16.
<Sysname> system-view
226