Viewing Rip Peer Information - HP 2920 Series Multicast And Routing Manual

The RIP interface information also includes the following fields:
Bad packets received
Bad routes received
Sent updates
To show the RIP interface information for the interface with IP address 100.2.0.1, enter the show
ip rip interface command:
Example 32 The show IP rip interface output by IP address
HP Switch# show ip rip interface 100.2.0.1
RIP interface information for 100.2.0.1
IP Address : 100.2.0.1
Status
Send Mode : V2-only
Recv mode : V2-only
Metric : 1
Auth : none
Bad packets received : 0
Bad routes received
Sent updates : 0

Viewing RIP peer information

To display RIP peer information, enter the show ip rip peer command at any context level.
The resulting display will appear similar to the following:
Example 33 Output for the show IP rip peer command
HP Switch# show ip rip peer
RIP peer information
IP Address
--------------- ----------- ---------------------
100.1.0.100
100.2.0.100
100.3.0.100
100.10.0.100
This display lists all neighboring routers from which the routing switch has received RIP updates.
The following fields are displayed:
IP address
Bad routes
Last update timeticks
To show the RIP peer information for a specific peer with IP address 100.1.0.100, enter show
ip rip peer 100.1.0.100.
Number of packets that were received on this interface and were not processed for any
reason.
Number of route entries that were received on this interface and were not processed
for any reason.
Number of RIP routing updates that have been sent on this interface.
: enabled
: 0
Bad routes Last update timeticks
0 1
0 0
0 2
0 1
IP address of the RIP peer neighbor.
The number of route entries that were not processed for any reason.
How many seconds have passed since the routing switch received an update from this peer
neighbor.
Configuring RIP 59