Peer Ipv6-Prefix; Peer Keep-All-Routes (Ipv6 Address Family View) - HP 6125G Command Reference Manual

Examples
# Terminate the session with peer 1:2::3:4.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] peer 1:2::3:4 ignore

peer ipv6-prefix

Syntax
peer { group-name | ipv4-address | ipv6-address } ipv6-prefix ipv6-prefix-name { import | export }
undo peer { group-name | ipv4-address | ipv6-address } ipv6-prefix { import | export }
View
IPv6 address family view
Default level
2: System level
Parameters
group-name: Name of an IPv4 or IPv6 peer group, a string of 1 to 47 characters.
ipv4-address: IPv4 address of a peer.
ipv6-address: IPv6 address of a peer.
ipv6-prefix-name: IPv6 prefix list name, a string of 1 to 19 characters.
import: Applies the filtering policy to routes received from the specified peer/peer group.
export: Applies the filtering policy to routes advertised to the specified peer/peer group.
Description
Use peer ipv6-prefix to specify an IPv6 prefix list to filter routes incoming from or outgoing to a peer or
peer group.
Use undo peer ipv6-prefix to remove the configuration.
By default, no IPv6 prefix list is specified for filtering.
Examples
# Reference the IPv6 prefix list list 1 to filter routes outgoing to peer 1:2::3:4.
<Sysname> system-view
[Sysname] ip ipv6-prefix list1 permit 2002:: 64
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] peer 1:2::3:4 ipv6-prefix list1 export

peer keep-all-routes (IPv6 address family view)

Syntax
peer { group-name | ipv4-address | ipv6-address } keep-all-routes
undo peer { group-name | ipv4-address | ipv6-address } keep-all-routes
317