Maximum Load-Balancing (Ospfv3 View); Ospfv3 - HP 6125XLG Command Reference Manual

Blade switch layer 3 - ip routing
Table of Contents

Advertisement

[Sysname-ospfv3-100] lsa-generation-interval 2 100 100
Related commands
lsa-arrival-interval

maximum load-balancing (OSPFv3 view)

Use maximum load-balancing to configure the maximum number of equal-cost multi-path (ECMP) routes.
Use undo maximum load-balancing to restore the default.
Syntax
maximum load-balancing maximum
undo maximum load-balancing
Views
OSPFv3 view
Predefined user roles
network-admin
Parameters
maximum: Specifies the maximum number of ECMP routes. When the maximum number is 1, OSPFv3
does not perform load balancing.
Usage guidelines
The value range for the maximum argument and the default setting depend on the max-ecmp-num
command.
If you set the maximum number of ECMP routes to m by using the max-ecmp-num command, the
maximum argument in the maximum load-balancing command is in the range of 1 to m and defaults to
m.
Examples
# Configure the maximum number of ECMP routes as 2.
<Sysname> system-view
[Sysname] ospfv3 100
[Sysname-ospfv3-100] maximum load-balancing 2
Related commands
max-ecmp-num

ospfv3

Use ospfv3 to enable an OSPFv3 process and enter OSPFv3 view.
Use undo ospfv3 to disable an OSPFv3 process.
Syntax
ospfv3 [ process-id | vpn-instance vpn-instance-name ] *
undo ospfv3 [ process-id ]
379

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents