Juniper ACX1000 Configuration Manual page 437

Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
NOTE: The maximum number of DHCP (and DHCPv6) local server clients
or DHCP (and DHCPv6) relay clients can also be specified by Juniper Networks
VSA 26-143 during client login. The VSA-specified value always takes
precedence if the
If the VSA-specified value differs with each client login, DHCP uses the largest
limit set by the VSA until there are no clients on the interface.
To configure the maximum number of DHCP clients allowed per interface:
Specify that you want to configure override options.
1.
For DHCP local server:
[edit system services dhcp-local-server]
user@host# edit overrides
For DHCPv6 local server:
[edit system services dhcp-local-server dhcpv6]
user@host# edit overrides
For DHCP relay agent:
[edit forwarding-options dhcp-relay]
user@host# edit overrides
For DHCPv6 relay agent:
[edit forwarding-options dhcp-relay dhcpv6]
user@host# edit overrides
Configure the maximum number of clients allowed per interface. (DHCP local server,
2.
DHCPv6 local server, DHCP relay agent and DHCPv6 relay agent all support the
statement.)
interface-client-limit
[edit system services dhcp-local-server overrides]
user@host# set interface-client-limit number
NOTE: For DHCP local server and DHCP relay agent, you can use either the
interface-client-limit
statement to set a limit of one client per interface. The
statement with a value of 1 retains the existing client and rejects any new
client connections. The
deletes the existing client and allows a new client to connect.
Overriding Default DHCP Local Server Configuration Settings
Allowing Only One DHCP Client Per Interface
Deleting DHCP Local Server and DHCP Relay Override Settings
Extended DHCP Local Server Overview
Chapter 11: Configuring DHCP and DHCPv6 Relay Agent
statement specifies a different number.
interface-client-limit
statement or the
client-discover-match incoming-interface
client-discover-match incoming-interface
interface-client-limit
statement
379