4.3.1.2
IP Configuration
To access this page:
1.
Navigate to Configuration > System and click IP.
The IP Configuration page displays.
The following table describes the items in the previous figure.
Item
Domain Name
Mode
DNS Server (0 ~ 3)
DNS Proxy
Save
Reset
To configure the IP interfaces:
EKI-8500 Series User Manual
Figure 4.4 Configuring IP Settings
Description
Enter the string to define the domain name using alpha numeric
characters (A-Z, a-z), digits (0-9), and minus symbol (-). String length
is 0 to 255. No space characters are supported. The first character
must be an alphanumeric character. The first or last character must
not be a minus sign.
Click the drop-down menu to set the mode as a Host or a Router. In
Host mode, IP traffic between interfaces is not routed, while in Router
mode traffic is routed between all interfaces.
Click the drop-down menu to set the DNS name resolution for the
device. The following modes are supported:
No DNS server (default): No DNS server is used.
Configured IPv4 or IPv6: Enter the specified IPv4/IPv6 address
of the DNS Server.
From any DHCPv4/DHCPv6 interfaces: First DNS server
instance from a DHCP lease to a DHCP-enabled interface is
used.
From this DHCPv4/DHCPv6 interface: Specify a DHCP-enabled
interface to provide DNS server function.
Click to enable DNS proxy. The system relay DNS requests to the
currently configured DNS server, and replies as a DNS resolver to the
network client devices.
Click Save to store the settings.
Click Reset to clear the settings.
Figure 4.5 Configuring IP Interfaces
33