Table of Contents
Advertisement
The following table describes the items in the previous figure.
Item
Description
VLAN ID
Enter the VLAN ID to configure.
Querier State
Select Enable or Disable status on the selected VLAN.
Querier Version
Select the querier version (IGMPV1 or IGMPV2) designated to the
MLD Querier function.
Apply
Click Apply to save the values and update the screen.
The ensuing table for MLD Querier Status lists the following settings (informational
only):
VLAN ID, Querier State, Querier Status, Querier Version and Querier IP
MLD Static Group
The MLD Static Group page allows you to configure specified ports as static member
ports.
To access this page, click L2 Switching > Multicast > MLD Snooping > MLD Static
Group.
Figure 4.39 L2 Switching > Multicast > MLD Snooping > MLD Static Group
The following table describes the items in the previous figure.
Item
Description
VLAN ID
Enter the VLAN ID to define the local MLD Static Group.
Group IP Address
Enter the IP address associated with the static group.
Member Ports
Enter the ports designated with the static group.
Add
Click Add to add a MLD static group.
The ensuing table for MLD Static Groups Status lists the following settings
(informational only):
VLAN ID, Group IP Address, Member Ports and Modify
Multicast Groups
To access this page, click L2 Switching > Multicast > MLD Snooping > Multicast
Groups.
The ensuing table for Multicast Groups lists the following settings (informational
only):
ID, Group IP Address, Member Ports, Type and Life (Sec)
Router Ports
To access this page, click L2 Switching > Multicast > MLD Snooping > Router
Ports.
The ensuing table for Router Ports lists the following settings (informational only):
VLAN ID, Port and Expiry Time (Sec)
Enable: Enable IGMP Querier Election.
Disable: Disable IGMP Querier Election.
62
EKI-7706 Series User Manual
Advertisement
Table of Contents
Troubleshooting
