Figure 4.36 L2 Switching > Multicast > Mld Snooping > Mld Querier; Figure 4.37 L2 Switching > Multicast > Mld Snooping > Mld Static Group - Advantech EKI-7708 Series User Manual

MLD Querier
The MLD Querier page allows you to select and enable/disable the MLD querier and
define the version (IGMPv1 or IGMPv2) when enabled.
To access this page, click L2 Switching > Multicast > MLD Snooping > MLD
Querier.
Figure 4.36 L2 Switching > Multicast > MLD Snooping > MLD Querier
The following table describes the items in the previous figure.
Item
VLAN ID
Querier State
Querier Version
Apply
The ensuing table for MLD Querier Status settings are informational only: VLAN ID,
Querier State, Querier Status, Querier Version and Querier IP.
MLD Static Group
The MLD Static Group page allows you to configure specified ports as static member
ports.
To access this page, click L2 Switching > Multicast > MLD Snooping > MLD Static
Group.
Figure 4.37 L2 Switching > Multicast > MLD Snooping > MLD Static Group
The following table describes the items in the previous figure.
Item
VLAN ID
Group IP Address
Member Ports
Add
EKI-7708 Series User Manual
Description
Enter the VLAN ID to configure.
Select Enable or Disable status on the selected VLAN.

Enable: Enable IGMP Querier Election.

Disable: Disable IGMP Querier Election.
Select the querier version (IGMPV1 or IGMPV2) designated to the
MLD Querier function.
Click Apply to save the values and update the screen.
Description
Enter the VLAN ID to define the local MLD Static Group.
Enter the IP address associated with the static group.
Enter the ports designated with the static group.
Click Add to add a MLD static group.
61