Table of Contents
Advertisement
via a double-tagged (trunk) port, where both inner and outer VLANs are handled by the
attached machine (which sees double-tagged 802.1ad VLAN frames).
Global Settings
The Global Settings page allows you to set the outer VLAN Ethertype setting.
To access this page, click L2 Switching > Q-in-Q > Global Settings.
Figure 50: L2 Switching > Q-in-Q > Global Settings
The following table describes the items in the previous figure.
Item
Outer VLAN Ethertype
Enter the outer VLAN handled by the switch giving the attached machine a
single-tagged 802.1Q VLAN frame.
Apply
Click Apply to save the values and update the screen.
Table 37: L2 Switching > Q-in-Q > Global Settings
92
eWorx SE500 Series Switches
Description
:
Advertisement
Table of Contents
