Ipv6 Settings; Dhcp Client Option 82; Figure 4.20 System > Ipv6 Settings; Figure 4.21 System > Ipv6 Information - Advantech EKI-7720 Series User Manual

4.4.2

IPv6 Settings

To access this page, click System > IPv6 Settings.
The following table describes the items in the previous figure.
Item
Auto Configuration
IPv6 Address
Gateway
DHCPv6 Client
Apply
The ensuing table for IPv6 Information settings are informational only: Auto Config-
uration, IPv6 In Use Address, IPv6 In Use Router, IPv6 Static Address, IPv6 Static
Router and DHCPv6 Client.
The following figure displays the IPv6 Information settings
4.4.3

DHCP Client Option 82

The DHCP Client Option 82 configurable Circuit ID and Remote ID feature enhances
validation security by allowing you to select naming choices suboptions. You can
select a switch-configured hostname or specify an ASCII test string for the remote ID.
You can also configure an ASCII text string to override the circuit ID.
EKI-7720 Series User Manual
Figure 4.20 System > IPv6 Settings
Description
Select the radio button to enable or disable the IPv6.
Enter the IPv6 address for the system.
Enter the gateway address for the system.
Enter the DHCPv6 address for the system.
Click Apply to save the values and update the screen.
Figure 4.21 System > IPv6 Information
39