Sony MVS-8000X User Manual page 762

Refreshing (recalling) the disk recorder/Extended VTR file list
1
2
3
File list sharing
You can share the recalled file list across serial ports connected to the same
disk recorder.
For details of file list sharing settings, see "Sharing Disk Recorder/Extended
VTR File Lists" in Chapter 19 (Volume 3).
Sorting files in the list
You can sort the files in the list by name, number, or update date.
1
762
Control of VTRs, Extended VTRs, and Disk Recorders
In the Device menu, press VF3 'DDR/VTR' and HF3 'File List.'
The Device >DDR/VTR > File List menu appears.
In the status area, two lists appear.
The upper list shows the selected device name, and the currently selected
file name (register number), and set file name.
The lower list shows a list of files for the selected device (the device
appearing in the upper list). In this list is shown the file name (register
number) set when the material was recorded, the length of the file data
(timecode value), and the file update information.
Notes
• File update information is not shown when using the video disk
communications protocol.
• When using an Extended VTR, the length of file data and file update
information are not shown, and the register number is shown in place of
the file name.
Select the device for which you want to recall the file list, using the knob.
Knob Parameter Setting
1 Dev Device number
Press the [File List Update] button.
This starts the process of recalling the file list, and a message box appears.
When the file list recall is completed, the message box disappears.
To cancel recalling the file list
During the recall, press the [Cancel] button in the message box.
In the Device menu, press VF3 'DDR/VTR' and HF3 'File List.'
The Device >DDR/VTR >File List menu appears.
Setting values
1 to 12