Sony MVS-8000X User Manual page 340

Frame in-out: Completed in two transitions. In the first transition, the new
Picture-in-picture: The one-channel mode and two-channel mode differ as
2D trans: The new video appears over the old video, while undergoing
3D trans: In one-channel mode, the new video appears over the old video,
Sparkle: The new video appears over the old video with a nonlinear effect
Split slide: The new video appears in strip form while sliding interleaved in the
Mosaic: In the first half of the transition, a mosaic is gradually applied to the
Defocus: In the first half of the transition, the old video is gradually defocused,
340
Overview
video appears, then on the second transition the new video goes out and the
old video returns.
(Pattern numbers: 1201 to 1208, 1221 to 1224 (one-channel mode), 2851
to 2854, 2861 to 2864 (two-channel mode))
follows.
In one-channel mode, this completes in two transitions. In the first
transition, the old video shrinks, and the new video appears behind it.
In the second transition, the old video expands again until it is its original
size.
(Pattern number: 1251 (one-channel mode))
In two-channel mode, in the first half of the transition, the old video
shrinks, and the new video appears. In the second half of the transition, the
new video expands, and the old video disappears. You can move the
pattern from the current position by a relative amount. During the
transition, the signal from the utility 2 bus of the M/E bank appears as the
background.
(Pattern numbers: 2651 and 2652 (two-channel mode))
expansion, two-dimensional rotation and translation.
(Pattern numbers: 1051 to 1058, 1061 to 1064, 1068 (one-channel mode))
while undergoing expansion, three-dimensional rotation and translation.
(Pattern numbers: 1071, 1072, 1074, 1076, 1077, 1088, 1091 to 1094 (one-
channel mode))
In two-channel mode, the old video changes to the new video while both
undergo expansion, three-dimensional rotation and translation.
(Pattern numbers: 2631 to 2634, 2642, 2644 (two-channel mode))
applied, such as broken glass, explosion, or melt. Next this returns to the
original video as the effect gradually reduces.
(Pattern numbers: 1391, 1393, 1394, 1396, 1398, 1399 (one-channel
mode))
opposite direction over the old video.
(Pattern numbers: 1384 to 1389 (one-channel mode))
old video, then at the 50% point the inner image changes to the new video.
In the second half, the mosaic effect on the new video is gradually reduced,
returning to the original image at 100%.
(Pattern number: 1701 (one-channel mode))
then at the 50% point the inner image changes to the new video. In the
second half, the defocusing effect on the new video is gradually reduced,