Copying Cross-Point Assign Tables - Sony MVS-8000X User Manual

Knob
1
2
3
Press [Source Name].
A keyboard window appears.
4
Enter any name of not more than 16 characters, then press [Enter].
For details of keyboard window operation, see "Menu Operations" in
Chapter 2 (Volume 1).
Sequential names for multiple signals
When you specify a number at the end of a signal name, all of the signals in the
range selected by knobs 1 and 2 are automatically assigned names ending with
sequential numbers.
Example: To assign sequential names to source signal 2 through source signal
4
1. In step 2 above, set knob 1 to "2," and set knob 2 to "3."
2. Set the name of source signal 2 to "CAM2."
The name "CAM3" is assigned automatically to source signal 3, and the
name "CAM4" is assigned automatically to source signal 4.
Setting the source name display color
1
In the Panel >Xpt Assign >Table Button Assign >Src Name/LCD Color
menu, turn the knobs to select the setting target.
Knob
1
2
2
In the <LCD Color> group, select the color (Orange/Green/Yellow).

Copying Cross-Point Assign Tables

The contents of a cross-point assign table can be copied to another cross-point
assign table, and vice versa.
Parameter Adjustment
Source No Source signal selection
Num Number of source signals to be
selected
Parameter Adjustment
Source No Source signal selection
Num Number of source signals to be
selected
Setting values
1 to 228
1 to 228
Setting values
1 to 228
1 to 228
Cross-Point Settings (Xpt Assign Menu)
1119