Sony MVS-8000X User Manual page 1118

Setting the cross-point button shift operation
You can set the operation of the rightmost button in each row of cross-point
buttons excluding the reentry buttons.
In the <Xpt Shift Mode> group of the Panel >Xpt Assign >Main, V/K Pair
Assign menu or Panel >Xpt Assign >Table Button Assign menu, select one of
the following for each cross-point table.
Hold: Acts as a shift button, and the shifted version of the cross-point buttons
Lock: Acts as a shift button, and pressing the button toggles between the
Off: Acts as a cross-point button, in a 16-button system as button number 16,
Setting the action of the [SHIFT] button in the cross-point control
block
In the <Display Shift Mode> group of the Panel >Xpt Assign >Main, V/K Pair
Assign menu or Panel >Xpt Assign >Table Button Assign menu, select either
of the following.
Shift All Bus: When this is On, it functions as a shift button for all buses.
Key5-8 Select: This functions as a shift button dedicated to the key 1 and key
Notes
• It is not possible to make this setting separately for each of the M/E and
• "Shift All Bus" is only valid when the cross-point button shift operation (see
• If both Shift All Bus and Key5-8 Select are off, this button functions as a shift
Setting the source signal name
1
2
1118
Cross-Point Settings (Xpt Assign Menu)
is enabled while the button is held down.
shifted version and the unshifted version.
in a 24-button system as button number 24, and in a 32-button system as
button number 32.
2 rows. When On, keys 5 to 8 are selected, and when Off, keys 1 to 4 are
selected.
PGM/PST banks.
previous item) is set to "Lock" or "Off."
button for the source name display. It is not possible to set both Shift All Bus
and Key5-8 Select to On.
In the Panel >Xpt Assign menu or Panel >Xpt Assign >Table Button
Assign menu, press [Src Name/LCD Color].
The Src Name/LCD Color menu appears.
Turn the knob to select the signal to be set.