Adjusting The Alarms - Sony MVS-8000X User Manual

LCD: Adjust the brightness of the source name displays and the LCD buttons
LED: Adjust the brightness of the LED displays in the numeric keypad control
Switch: Adjust the brightness of the panel switches.
The following description takes the LCD brightness as an example. Use a
similar process for the other adjustments.
1
2

Adjusting the Alarms

In the Panel >Maintenance menu, make the following settings.
To give audible feedback from menu touch screen operations: Press
Calibrating the Touch Panel
1
2
3
4
1162
Screen Saver and Other Settings (Maintenance Menu)
in the Flexi Pad control block.
block and so forth.
In the Panel >Maintenance menu, press [LCD Brightness].
Adjust the following parameter.
Knob Parameter Adjustment
1 Brightness Menu screen brightness
a) The larger the value, the brighter the screen.
[Touch Beep], turning it on.
In the Panel >Maintenance menu, press [Touch Panel Calibration].
The following message appears.
"To Perform Calibration, please touch the center of each plus sign."
Press [Yes].
Press the center of the plus sign displayed on the screen.
When you press on the plus sign, it disappears and a diagonally opposite
plus sign appears.
Press the center of the plus sign.
A confirmation message appears.
• Select "Yes" to restart the panel reflecting the new setting.
• Select "No" to cancel the setting and return to the Maintenance menu.
Setting values
a)
1 to 5