Overview; Snapshot Types - Sony MVS-8000X User Manual

Overview

The term "snapshot" refers to a function whereby the various settings required
to apply a particular effect to an image are saved in memory as a set of data, for
recall as required, to recover the original state.
You can carry out snapshot operations using the numeric keypad control block
(see page 851), the Flexi Pad control block (see page 856), the Multifunction
Flexi Pad control block (see page 862), and the Snapshot menu (see page 869).
Notes
If the M/E bank has the Inhibit setting (see "Overall Control Panel Settings
(Config Menu)" in Chapter 19 (Volume 3)), it is not possible to recall a
snapshot on that M/E bank.

Snapshot Types

Snapshots are divided as follows.
Snapshots applying to a particular region (functional block of the
switcher or DME)
The term "snapshot" alone usually refers to this type of snapshot. This only
applies to regions assigned to region selection buttons in the numeric keypad
control block and Multifunction Flexi Pad control block.
For details about a region, see "Regions" (page 766).
Master snapshot: This applies to the selected regions and the register numbers
Snapshots applying only to particular functions
This type of snapshot includes the following.
Key snapshot: This includes the key on/off state and all key settings other than
Wipe snapshot: This includes the wipe settings of each of the M/E-1 to M/E-
DME wipe snapshot: This includes the DME wipe settings of each of the M/
848
Overview
saved in the regions.
A master snapshot can be saved and recalled using the numeric keypad
control block and the Multifunction Flexi Pad control block.
key priority for each keyer. (See "Key Snapshots" in Chapter 4 (Volume
1).)
4 and PGM/PST banks. (See "Wipe Snapshots" in Chapter 5 (Volume 1).)
E-1 to M/E-4 and PGM/PST banks.