Sony MVS-8000X User Manual page 672

Notes
The function for setting the bar mode of the lighting area is not supported on
the MVE-8000A.
Applying the Lighting effect
1
2
3
4
672
DME Special Effect Operations
In the DME menu, select VF5 'Light/Trail' and HF1 'Lighting.'
The Lighting menu appears.
Press [Lighting], turning it on.
The Lighting effect is enabled.
In the <Light Pattern> group, select the lighting pattern Plane, Bar or
Preset.
You can adjust the intensity of the light and other parameters with the
knobs.
Set the parameters.
The parameters differ as follows, depending on the selected lighting
pattern.
• When Plane is selected
Knob Parameter
1 Light
5 Total Ambient Brightness of whole image
a) You can make the Lighting effect more effective by adjusting [Total Ambient] to lower the
brightness of the entire image. This setting is used both by this effect and by the
Spotlighting effect.
Notes
The Total Ambient parameter is not supported on the MVE-8000A.
• When Bar is selected
Knob Parameter
1 Light
2 Ambient
5 Total Ambient Brightness of whole image
a) You can make the Lighting effect more effective by adjusting [Total Ambient] to lower the
brightness of the entire image. This setting is used both by this effect and by the
Spotlighting effect.
Adjustment
Intensity of light in highlight area 0.00 to 100.00
Adjustment
Intensity of light in highlight area 0.00 to 100.00
Intensity of light in ambient area 0.00 to 100.00
Setting values
a)
0.00 to 100.00
Setting values
a)
0.00 to 100.00