Keypad Control Block Or Multifunction Flexi Pad Control Block - Sony MVS-8000X User Manual

2
3
4
5
6
Notes
Only regions assigned here can be used for keyframe or snapshot recall.
If an M/E bank is not assigned to a region selection button in the numeric
keypad control block or Multifunction Flexi Pad control block, the M/E Flexi
Pad control block or Multifunction Flexi Pad control block cannot be used to
recall a snapshot.
1092
Overall Control Panel Settings (Config Menu)
To assign regions to the region selection buttons in the Multifunction Flexi
Pad control block or the numeric keypad buttons in the memory recall
section, press either of the following buttons in the <Flexi Pad Area Sel>
group of the button area.
[Region Sel Btn Area] button: When assigning a region to the region
selection buttons
[Mem Rcl Btn Area] button: When assigning a region to the numeric
keypad buttons in the memory recall section
Press the indication of the button for the assignment.
The button you pressed appears in reverse video.
Using any of the following methods, select one of the four regions for the
setting.
• Press directly on the list in the upper part of the right side.
• Press the arrow keys to scroll the reverse video cursor in the list in the
upper part of the right side.
• Turn the knob.
Knob Parameter
1 Button Assign Selection to which setting
Using any of the following methods, select the region to be assigned.
• Press directly on the list in the lower part of the right side.
• Press the arrow keys to scroll the reverse video cursor in the list in the
lower part of the right side.
• Turn the knob.
Knob Parameter
2 Region
Press [Set], to confirm the selection.
This assigns the region to the region selection button in the numeric
keypad control block.
Adjustment
applies
Adjustment
Region selection
Setting values
1 to 4
Setting values
1 and upwards