Setting Dme And Switcher Interfaces - Sony MVS-8000X User Manual

3
4
5

Setting DME and Switcher Interfaces

Select the signals (AUX bus output signals) input to the DME as follows.
Notes
When using the MVE-8000A, it is not necessary to make this setting.
1
2
1210
Interfacing With External Devices (Device Interface Menu)
Remote2: Make the settings for the REMOTE2 port.
Remote3: Make the settings for the REMOTE3 port.
Remote4: Make the settings for the REMOTE4 port.
Using any of the following methods, select the AUX bus.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob Parameter Adjustment
1 No AUX bus selection
a) 0: EDIT PVW
1 to 48: AUX1 to AUX48
Select whether to enable or disable AUX bus control from the <Control
Mode> group.
Enable: enable control of the port selected in step 2.
Disable: disable control of the port selected in step 2.
Manual: make whether control of the port selected in step 2 is possible or
not depend on the setting in the Misc menu.
Repeat steps 2 to 4 as required to make the settings for other ports.
Press [DME SDI Interface] in the Switcher >Device interface menu.
The DME SDI Interface menu appears.
Using any of the following methods, select the DME channel to which
operations apply.
• Press directly on the list on the left of the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob Parameter Adjustment
1 DME Ch No DME channel selection
Setting values
a)
0 to 48
Setting values
1 to 24