Sony MVS-8000X User Manual page 667

a) Set when Lock is on.
b) Set when Lock is off.
c) Setting for SD 4:3, SD 16:9
d) Setting for HD 4:3, HD 16:9
To stop the waves in the melting part
Press [Lock], turning it on.
With each press, the waves alternately stop and start moving again.
To select the shape of the part beginning to melt
Press [Form] and set the following parameter.
Knob
1
a) 1 (SINE): Sine wave
2 (PARABOLA): Parabola wave
3 (TRIANGLE): Triangular wave
4 (RECTANGLE): Rectangular wave
5 (CIRCLE): Circular wave
6 (CUBIC): Cubic wave
7 (MELT1): Melting wave 1
8 (MELT2): Melting wave 2
To make the melting part stardust
1
Press [Pixel], turning it on.
2
Set the following parameters.
Knob
1
2
Character Trail settings
You can set the effect starting position, the degree of expansion, the slant angle
of the effect region, and trail direction, the degree to which the image
disappears, the trail type and amount of stardust, and other parameters.
To apply the Character Trail effect
With the Character Trail menu displayed, set the following parameters.
Knob
1
Parameter Adjustment
Form Waveform
Parameter Adjustment
Density Degree to which image
disappears
Random Degree to which pixel positions
become more randomized
further from the center
Parameter Adjustment
Transition Position where effect starts
Setting values
a)
1 to 8
Setting values
0.00 to 100.00
0.00 to 100.00
Setting values
a)
–8.000 to +8.000
b)
–32.000 to +32.000
DME Special Effect Operations
667