• If you selected 16:9 in step 1
Knob
1
2
3
4
To return the parameter values to their default values
Press [Unity] in the <Crop> group.
Setting an Illegal Color Limit for Matte Signals
To enable the illegal color limiter for the signals generated by the DME internal
matte generator, press [Matte Illeg Col Limit] for DME1 in the DME >Input
menu, turning it on.
Making DME System Phase Adjustment
To adjust the DME reference phase, use the following procedure.
1
In the DME >Input menu, press [System Phase].
2
Set the following parameters.
Knob
1
2
Parameter
Adjustment
Top
Position of top side
Left
Position of left side
Right
Position of right side
Bottom
Position of bottom side
Parameter
Adjustment
DME1
DME1 system phase adjustment
Phase
DME2
DME2 system phase adjustment
Phase
Setting values
–32.00 to +96.00
–32.00 to +96.00
Settings Relating to Signal Inputs (Input Menu)
Setting values
–9.00 to +9.00
–16.00 to
+16.00
–16.00 to
+16.00
–9.00 to +9.00
1215