Sony MVS-8000X User Manual page 1173

To do so, in the Switcher >Config >Side Flags menu press [Auto Crop].
Pressing this button toggles the setting on and off.
This setting applies to all of the M/E and PGM/PST banks.
Adjusting the width of the side flags
You can adjust the width of the side flags.
1
In the Switcher >Config >Side Flags menu, press [Width].
2
Adjust the following parameters.
Knob
3
4
5
Displaying the menu for enabling/disabling the side flags
In the Switcher >Config >Side Flags menu, press [Misc >Enbl >Setup Flags].
Displaying the menu for assigning the side flags on/off function
to a cross-point button
In the Switcher >Config >Side Flags menu, press [Side Flags Button Assign].
Parameter Adjustment
Left Width of left side flag
Right Width of right side flag
All Width of both side flags
Settings for Switcher Configuration (Config Menu)
Setting values
–100.00 to +100.00
–100.00 to +100.00
Left value shown
1173