Sony MVS-8000X User Manual page 325

Selecting a wipe pattern in the Flexi Pad control block
To select a pattern with a standard type Flexi Pad control block, use the
following procedure. (It is not possible to select a wipe pattern with a simple
type Flexi Pad control block.)
1
In the M/E-1 Flexi Pad control block, press the [WIPE] button.
This switches the Flexi Pad control block to wipe snapshot mode.
2
In the memory recall section, press the [PTN NO] button.
This switches the Flexi Pad control block to wipe pattern number recall
mode.
3
Use the buttons in the memory recall section to enter the pattern number
consisting of up to three digits, and press the [ENTR] button.
The entry is confirmed, and now the numeric display shows the pattern
number.
WIPE button
Numeric display
Memory recall buttons
UNDO button
Flexi Pad control block (simple type)
325
Wipe Snapshots