Assigning A Cross-Point Button To Enable/Disable Side Flags - Sony MVS-8000X User Manual

Multi-format production switcher processor with ccp-8000 series center control panel volume 1

Hide thumbs Also See for MVS-8000X:

Table of Contents

Assigning a Cross-Point Button to Enable/Disable Side

By assigning the side flag function to the rightmost button in a cross-point

button row, you can use this button to enable/disable side flags for each of the

M/E and PGM/PST banks.

This setting applies to all of the M/E and PGM/PST banks.

When you make this assignment, the SHIFT button (the button assigned to the

shift function) is moved one to the left.

If a macro attachment is set, when you assign the button to the side flag

function, the button numbers are offset, and therefore when you press the

button this does not execute the macro. The settings, however, are maintained,

so that when you cancel the side flag assignment, the macro can be accessed

SHIFT button moves

one to the left

For details of side flag operations, see "Side Flag Settings" in Chapter 10

In the Panel >XPT Assign menu, press [Side Flags Button Assign].

The Side Flags Button Assign menu appears.

Press [Side Flags Btn Assign], turning it on.

This assigns the rightmost cross-point button to enabling/disabling the side

flag function.

Button for side flags

enable/disable

Cross-Point Settings (Xpt Assign Menu)