Sony MVS-8000X User Manual page 698

1
2
3
4
5
698
DME Special Effect Operations
In the <Spot Lighting Adjust> group of the Spot Lighting menu, press
[Light 1].
The Light 1 menu appears.
Press [Light 1], turning it on.
This enables the Light 1 light source, and you can now use the knobs to
adjust the parameters.
Set the following parameters.
Knob Parameter Adjustment
1 Total Brightness of whole image
Ambient
2 Intensity Intensity (brightness) of the light
source
3 Soft Softness of the lighted area
• Lowering the brightness of the image makes Spotlighting more
effective.
• The Total Ambient setting is shared with the Lighting function.
In the <Spot Mode> group, select the type of light source.
Parallel: Parallel light source. The direction can be set.
Point: Point light source. The position can be set.
Line: Line light source. The position and angle can be set.
Whole: Non-directional light source which illuminates the whole image
(no settings).
For more information about light source types, see "Light source types"
(page 690).
According to the selected light source type, set the following parameters.
When you selected Parallel
Knob Parameter Adjustment
1 Longitude Longitude
2 Latitude Latitude
a) Minus moves counterclockwise, plus moves clockwise.
Setting values
0.00 to 100.00
0.00 to 100.00
0.00 to 100.00
Setting values
a)
–8.00 to +8.00
–8.00 to +8.00