Sony MVS-8000X User Manual page 680

Defocusing the afterimage portion (Defocus)
Notes
The function to defocus the trail afterimage portion is not supported on the
MVE-8000A.
1
2
Applying stardust to the afterimage portion
The afterimage portion becomes stardust, and gradually disappears.
1
2
Setting a combine process
Select whether to add the Trail effect before or after the combine.
Notes
• The combine process function is not supported on the MVE-8000A.
• When you change the selection in the <Combine Process> group, the
afterimages which had been added up to then disappear.
680
DME Special Effect Operations
Press [Defocus], turning it on.
Set the following parameters.
Knob Parameter Adjustment
1 Defocus V Defocusing of the video
signal
2 Defocus K Defocusing of the key
signal
Press the [DUST] button, turning it on.
Set the following parameters.
Knob Parameter Adjustment
1 Trail Dust Amount of the afterimage
disappearing as stardust
2 Dust Soft Timing with which stardust
disappears
3 Dust Size Size of stardust
4 Dust Aspect Aspect ratio of stardust
a) The way in which the afterimage disappears is affected by both Decay and Trail Dust
parameter adjustments.
Setting values
0.00 to 100.00
0.00 to 100.00
Setting values
0.00 to 100.00
a)
0.00 to 100.00
0.00 to 100.00
–100.00 to +100.00