Sony MVS-8000X User Manual page 603

Example: Moving the right edge position in the "minus" direction.
Softening the inner and outer sides of art edges
1
In the Art Edge menu, press [Soft], turning it on.
2
Adjust the following parameters.
Knob
1
2
3
4
5
Setting the way in which art edge colors change
1
In the <Art Edge Source> group of the Art Edge menu, select the color
pattern to apply to the art edges.
Flat Color: Uses Color 1 (see page 606) as a flat color.
Gradation Matte: Color 1 changes to Color 2 (see page 606) at the border
lines (see step 2 (page 604)).
Rainbow Matte: The color set as Color 1 changes hue into color on the
border lines.
Radial Gradation: Color 1 on the inner side is mixed into Color 2 on the
outer side, according to the shape of the art edge.
Radial Rainbow: The hue of Color 1 on the inner side changes into Color
2 on the outer side, according to the shape of the art edge.
Art edge portion
Parameter Adjustment
Inner H Simultaneously adjust softness of
left and right inner edges
Inner V Simultaneously adjust softness of
top and bottom inner edges
Outer H Simultaneously adjust softness of
left and right outer edges
Outer V Simultaneously adjust softness of
top and bottom outer edges
All Simultaneously adjust softness of
all inner and outer edges.
Moving in the
minus direction
Position after Position before
moving moving
Setting values
0.00 to 100.00
0.00 to 100.00
0.00 to 100.00
0.00 to 100.00
Value of Outer H
shown
DME Special Effect Operations
603