Assigning A Region To The Region Selection Buttons In The Numeric - Sony MVS-8000X User Manual

Assigning a Region to the Region Selection Buttons in
the Numeric Keypad Control Block or Multifunction
Flexi Pad Control Block
You can set a maximum of four regions to each of the region selection buttons
in the numeric keypad control block or Multifunction Flexi Pad control block.
In the Multifunction Flexi Pad control block, pressing the region selection
button [MORE] displays the regions not assigned to the region selection
buttons on the memory recall section numeric keypad buttons, so that you can
select them, and set the assignment of regions to the numeric keypad buttons.
However, in the Multifunction Flexi Pad control block, it is not possible to
assign a region to the [EXIT] button.
For details of the Multifunction Flexi Pad control block, see "Multifunction
Flexi Pad Control Block" in Chapter 2 (Volume 1).
1
In the Panel >Config menu, press [10 Key Region Assign].
The 10 Key Region Assign menu appears.
When a CCP-6224 or CCP-6324 control panel including a Multifunction
Flexi Pad control block is connected, the display in the button area at the
lower part of the status area changes as follows.
The left side of the status area shows region selection buttons; the upper
part of the right side shows a list of regions assigned to region selection
buttons, and the lower part shows a list of assignable regions.
Overall Control Panel Settings (Config Menu)
1091