Importing And Exporting Files - Sony MVS-8000X User Manual

Importing and Exporting Files

You can import or export frame memory image data from or to external media.
Import: to transfer a file in a different format from hard disk or memory card
to frame memory as image data.
Export: to change the file format of register data and save the data on hard disk
or memory card.
To carry out these operations, use the File >All, External File >Import/Export
menu.
For details of the formats supported for import and export, see "Importing or
exporting files to or from frame memory" (page 979).
Notes
When the signal format is 1080P, exporting is not possible.
Displaying the Import/Export Menu
In the File menu, select VF6 'All, External File' and HF2 'Import/Export.'
The list on the left shows the frame memory registers, and the list on the right
shows the content of the external recording media.
Importing Frame Memory Data
As an example, to import data in a bitmap format from a memory card to a
frame memory register, use the following procedure.
Notes
When the signal format is 1080P, importing as an extended clip file is not
possible.
About the points you should take note of when importing data, see "About
import image size" (page 980).
1
In the Import/Export menu, press the file format selection area at the top
of the screen to select [Frame Memory (.BMP)].
Files of the selected type are shown in the list on the right.
Importing and Exporting Files
1001